Papers

Named list

[Bazant et al., 2004]

Z. P. Bazant, S. D. Pang, M. Vorechovsky, D. Novák, and R. Pukl. Statistical size effect in quasibrittle materials: Computation and extreme value theory. In V. C. Li, K. J. Willam, C. K. Y. Leung, and S. L. Billington, editors, 5^th Int. Conference FraMCoS – Fracture Mechanics of Concrete and Concrete Structures, volume 1, pages 189–196, Vail, Colorado, USA, 2004. Ia-FraMCos.

[Bazant et al., 2005]

Z. P. Bazant, M. Vorechovsky, and D. Novák. Role of deterministic and statistical length scales in size effect for quasibrittle failure at crack initiation. In G. Augusti, G. I. Schuëller, and M. Ciampoli, editors, ICoSSaR '05 the 9 ^th International Conference on Structural Safety and Reliability, pages 411–415, Rome, Italy, 2005. Millpress Rotterdam, Netherlands.

[Bazant et al., 2007a]

Z. P. Bazant, S. D. Pang, M. Vorechovsky, and D. Novák. Energetic-statistical size effect simulated by sfem with stratified sampling and crack band model. International Journal of Numerical Methods in Engineering, page in press, 2007. also a Report, 2005, Dept. of Civil Engrg., Northwestern University, Evanston, Illinois.

[Bazant et al., 2007b]

Z. P. Bazant, M. Vorechovsky, and D. Novák. Asymptotic prediction of energetic-statistical size effect from deterministic finite element solutions. Journal of Engineering Mechanics (ASCE), 133(2):153–162, 2007. (DOI)

[Chudoba et al., 2005a]

R. Chudoba, M. Konrad, M. Vorechovsky, and O. Bruckermann. Textile reinforced concrete: correspondence between the local and global performance in uni-axial stress state. In Vlastimil Bílek and Zbynek Kersner, editors, 2^nd International symposium Nontraditional cement & concrete, pages 450–458, Brno, Czech Republic, 2005. Brno University of Technology.

[Chudoba et al., 2005b]

Rostislav Chudoba, Martin Konrad, Marcel Mombartz, Miroslav Vorechovsky, and Konstantin Meskouris. Multiscale modeling of textile reinforced concrete within a consistent modeling framework. In E. Ramm, W. A. Wall, K.-U. Bletzinger, and M. Bischoff, editors, 5^th International Conference on Computation of Shell and Spatial Structures, pages 1–4, Salzburg, Austria, 2005. CD-ROM proc.

[Chudoba et al., 2006a]

R. Chudoba, M. Vorechovsky, and Martin Konrad. Stochastic modeling of multi-filament yarns I: Random properties within the cross section and size effect. International Journal of Solids and Structures, 43(3-4):413–434, 2006.

[Chudoba et al., 2006b]

Rostislav Chudoba, Martin Konrad, Miroslav Vorechovsky, and Andreas Roye. Numerical and experimental study of imperfections in the yarn and its bond to cementitious matrix. ACI Spring Convention xxx, pages xxx–xxx, 2006.

[Chudoba et al., 2006c]

Rostislav Chudoba, Miroslav Vorechovsky, Jakub Jerábek, and Martin Konrad. TRC-specimens modeled as a chain of cracks bridged by bundles: Study of impact of local scatter on global tensile strength. In Maria S. Konsta-Gdoutos, editor, Measuring, Monitoring and Modeling Concrete Properties, pages 777–783, Alexandroupolis, Greece, 2006. Springer, Dotrecht, the Netherlands. An International Symposium dedicated to Prof. Surendra. P. Shah.

[Eliás and Vorechovsky, 2006]

J. Eliás and M. Vorechovsky. SMARTedt : textsc SMoothing by averaging and reduction of textsc Testing textsc da kern -.08em textsc ta. In Kolektiv, editor, Sborník príspevk r u konference Modelování v mechanice, pages 53–54 Extended abstract, Ostrava, Czech Republic, 2006. VSB-TU Ostrava, Fakulta stavební. full length paper on CD-ROM.

[Kala et al., 2001]

Z. Kala, D. Novák, and M. Vorechovsky. Probabilistic nonlinear analysis of steel frames focused on target reliability of Eurocodes. In R.B. Corotis, G.I. Schuëller, and M. Shinozuka, editors, ICoSSaR '01 8 ^th International Conference on Structural Safety and Reliability, page 146, Newport Beach, California, USA, 2001. A.A.Balkema Publishers, Netherlands.

[Konrad et al., 2006]

Martin Konrad, Jakub Jerábek, Miroslav Vorechovsky, and Rostislav Chudoba. Evaluation of mean performance of cracks bridged by multi-filament yarns. In Meschke, de Borst, Mang, and Bicanic, editors, EURO-C 2006 Computational Modelling of Concrete Structures, pages 873–880, Mayrhofen, Austria, 2006. Taylor & Francis Group, London.

[Lehky and Vorechovsky, 2002]

D. Lehky and M. Vorechovsky. Generování nahodnych polí: Teorie a aplikace. In 4^th Scientific PhD international workshop, pages CD–ROM, Brno University of Technology, 2002.

[Lehky et al., 2003]

D. Lehky, D. Matesová, D. Novák, B. Teply, V. Vesely, and M. Vorechovsky. Stochastic analysis, fracture mechanics and pre-stressed concrete members. In P. Konvalinka and J. Máca, editors, CTU Reports 1 Vol 7, 2003: Contribution to Computational and Experimental Investigation of Engineering Materials and Structures. (Dedicated to Zdenek Bittnar on the occasion of his 60^th birthday), pages 111–120, Prague, Czech Republic, 2003. Czech Technical University in Prague, Faculty of Civil Engineering.

[Lehky et al., 2005]

D. Lehky, D. Novák, Z. Kersner, M. Vorechovsky, D. Matesová, and L. Routil. Identifikace parametry v}pohtov}ch modely pomocm stochasticki simulace a neuronov}ch smtm, CIDEAS  Centrum integrovaniho navrhovanm progresivnmch stavebnmch konstrukcm: Dmlhm v}zkumna zprava za rok 2005. Technical report, Institute of Engineering Mechanics, Faculty of Civil Engineering, Brno University of Technology, 2005. In Czech.

[Matesová and Vorechovsky, 2005]

D. Matesová and M. Vorechovsky. Reduction functions for mechanical/fracture parameters of concrete at elevated temperatures. In Juraj Králik, editor, Proc. of the 4^th International Conference on New Trends in Statics and Dynamics of Buildings, page 165, Bratislava, Slovakia, 2005. Faculty of Civil Engineering STU Bratislava and Slovak Society of Mechanics SAS. CD Proc.

[Matesová and Vorechovsky, 2006a]

D. Matesová and M. Vorechovsky. Reinforcement corrosion in concrete: analytical approach to modelling. In Vejvoda and et al., editors, PPK 2006 Pravdepodobnost porusování konstrukcí, pages 313–320, Brno, Czech Republic, 2006. Brno University of Technology, Faculty of Civil Engineering and Faculty of Mechanical Engineering& Ústav aplikované mechaniky Brno, s.r.o. & Asociace strojních inzenyr r u & TERIS, a.s., pobocka Brno.

[Matesová and Vorechovsky, 2006b]

Dita Matesová and M. Vorechovsky. Mechanical parameters for numerical modeling of concrete at high temperatures. In 3 ^{tiny rd} PhD Workshop Brno-Prague-Weimar, also ISM-Bericht 1/2006 Bauhaus-Univeristät Weimar, pages 17–18, Weimar, Germany, 2006.

[Matesová et al., 2005]

D. Matesová, D. Lehky, and M. Vorechovsky. Kvazikrehké materiály pri vysokych teplotách: numerické modelování. In V. Sr r uma and Z. Sr r umová, editors, Betonárské dny 2005 (Concrete Days 2005), pages 455–460, Hradec Králové, Czech Republic, 2005. Czech Concrete Society with CBS Servis, ltd.

[Novák and Vorechovsky, 2006]

D. Novák and M. Vorechovsky. FReET. Technical report, Institute of Engineering Mechanics, Faculty of Civil Engineering, Brno University of Technology, Czech Republic, 2006. Program documentation – Part 1 – Theory.

[Novák and Vorechovsky, 2007]

D. Novák and M. Vorechovsky. Error assessment of random fields simulation for stochastic finite element method. Probabilistic Engineering Mechanics, page in review, 2007.

[Novák et al., 2001]

D. Novák, M. Vorechovsky, R. Pukl, and V. Cervenka. Statistical nonlinear analysis - size effect of concrete beams. In R. de Borst, J. Mazars, G. Pijaudier-Cabot, and J. G. M. van Mier, editors, 4^th Int. Conference FraMCoS – Fracture Mechanics of Concrete and Concrete Structures, pages 823–830, Cachan, France, 2001. Swets & Zeitlinger, Lisse.

[Novák et al., 2002a]

D. Novák, R. Pukl, R. Rusina, M. M. Vorechovsky, and V. Cervenka. Statistical, sensitivity and reliability assessment of computationally intensive problems: Nonlinear fracture mechanics analysis. In J. Mencík, editor, Reliability and Diagnostic of Transport Structures and Means 2002, First International Conference, pages 252–260, Pardubice, Czech Republic, 2002. University of Pardubice.

[Novák et al., 2002b]

D. Novák, R. Pukl, M. Vorechovsky, R. Rusina, and V. Cervenka. Structural reliability assessment of computationally intensive problems - nonlinear FEM analysis. In P.K. Das, editor, 1^st International ASRANet Colloquium, pages CD–ROM proc., Glasgow, Scotland, 2002.

[Novák et al., 2002c]

D. Novák, R. Rusina, and M. Vorechovsky. Freet - software pro pravdepodobnostní posudky vypoctove nárocnych problém r u mechaniky kontinua. In Reliability of Structures, 3^rd International Conference, Faculty of Civil Engineering, Ostrava University of Technology, pages 71–74, Ostrava, Czech Republic, 2002. Academy of Sciences – Institute of Theoretical and Applied Mechanics of the ASCR Prague.

[Novák et al., 2002d]

D. Novák, M. Vorechovsky, R. Rusina, D. Lehky, B. Teply, and Z. Kersner. FREET – Feasible Reliability Engineering Efficient Tool. Technical report, Institute of Engineering Mechanics, Faculty of Civil Engineering, Brno University of Technology / Cer Consulting, Praha, Czech Republic, 2002. Program documentation.

[Novák et al., 2003a]

D. Novák, Z. P. Bazant, and M. Vorechovsky. Computational modeling of statistical size effect in quasibrittle structures. In A. Der Kiureghian, S. Madanat, and J. M. Pestana, editors, ICASP 9, International Conference on Applications of Statistics and Probability in Civil Engineering, pages 621–628, San Francisco, USA, 2003. Millpress, Rotterdam.

[Novák et al., 2003b]

D. Novák, M. Vorechovsky, and R. Rusina. Small-sample probabilistic assessment - FREET software. In A. Der Kiureghian, S. Madanat, and J. M. Pestana, editors, ICASP 9, International Conference on Applications of Statistics and Probability in Civil Engineering, pages 91–96, San Francisco, USA, 2003. Millpress, Rotterdam.

[Novák et al., 2004]

D. Novák, B. Teply, Z. Kersner, and M. Vorechovsky. FReET. Technical report, Institute of Engineering Mechanics, Faculty of Civil Engineering, Brno University of Technology / Cer Consulting, Praha, Czech Republic, 2004. Program documentation – Part 1 – Theory.

[Novák et al., 2005a]

D. Novák, Z. Kersner, D. Lehky, L. Routil, M. Vorechovsky, J. Knezek, and R. Pukl. Virtual stochastic simulation of fiber reinforced concrete experiments. In Michael Pauser, editor, 1^st Central European Congress on Concrete Engineering: Fibre Reinforced Concrete in Practice, pages 35–38, Graz, Austria, 2005. Austrian society for concrete and construction technology.

[Novák et al., 2005b]

D. Novák, M. Vorechovsky, D. Lehky, R. Rusina, R. Pukl, and V. Cervenka. Stochastic nonlinear fracture mechanics finite element analysis of concrete structures. In G. Augusti, G. I. Schuëller, and M. Ciampoli, editors, ICoSSaR '05 the 9 ^th International Conference on Structural Safety and Reliability, pages 781–788, Rome, Italy, 2005. Millpress Rotterdam, Netherlands.

[Novák et al., 2005c]

D. Novák, M. Vorechovsky, and R. Rusina. Small Sample Simulation Methods for Statistical, Sensitivity and Reliability Analyses. In K. Bergmeister, Alfred Strauss, and Dieter Rickenmann, editors, Proc. of the 3 ^{tiny rd} Probabilistic Workshop: Technical Systems + Natural Hazards, also Schriftenreihe des Departments Nr. 7 - November 2005, pages 51–59, Vienna, Austria, 2005. Universität für Bodenkultur Wien, Department für Bautechnik + Naturgefahren.

[Novák et al., 2006]

D. Novák, M. Vorechovsky, and R. Rusina. FReET. Technical report, Institute of Engineering Mechanics, Faculty of Civil Engineering, Brno University of Technology, Czech Republic, 2006. Program documentation – Part 2 – User Manual.

[Novák et al., 2007]

D. Novák, R. Pukl, K. Bergmeister, M. Vorechovsky, D. Lehky, and V. Cervenka. Stochastic nonlinear analysis of concrete structures - Part I: From simulation of experiment and parameters identification to reliability assessment. In ICASP 10, 10 ^{tiny th} International Conference on Applications of Statistics and Probability in Civil Engineering, page in print, Kashiwa Campus, The University of Tokyo, Tokyo, Japan, July–August 2007. The University of Tokyo.

[Perla and Vorechovsky, 2003]

J. Perla and M. Vorechovsky. Vyuzití programu FEAT pri rekonstrukcích. In Statika 2003, Hotel Myslivna, Brno, 2003.

[Pukl et al., 2001]

R. Pukl, D. Novák, M. Vorechovsky, R. Rusina, and V. Cervenka. Stochastická nelineární analyza betonovych konstrukcí. In Betonárské Dny 2001 (Concrete Days 2001), pages 136–141, Pardubice, Czech Republic, 2001. CBZ.

[Pukl et al., 2005]

R. Pukl, J. Cervenka, V. Cervenka, D. Novák, M. Vorechovsky, and D. Lehky. Deterministic and statistical models for nonlinear fe analysis of frc-based structures. In Michael Pauser, editor, 1^st Central European Congress on Concrete Engineering: Fibre Reinforced Concrete in Practice, pages 130–133, Graz, Austria, 2005. Austrian society for concrete and construction technology.

[Pukl et al., 2006a]

R. Pukl, D. Novák, M. Vorechovsky, and K. Bergmeister. Uncertainties of material properties in nonlinear computer simulation. In Dirk Proske, Milad Mehdiapour, and Lucjan Gucma, editors, 4 ^{tiny th} International Probabilistic Symposium, pages 127–138, BAM Berlin, Germany, 2006.

[Pukl et al., 2006b]

Radomír Pukl, Marek Jansta, Jan Cervenka, Miroslav Vorechovsky, Drahomír Novák, and Radoslav Rusina. Spatial variability of material properties in advanced nonlinear computer simulation. In Meschke, de Borst, Mang, and Bicanic, editors, EURO-C 2006 Computational Modelling of Concrete Structures, pages 891–896, Mayrhofen, Austria, 2006. Taylor & Francis Group, London.

[Routil et al., 2005]

L. Routil, P. Frantík, D. Lehky, Z. Kersner, D. Novák, M. Vorechovsky, J. Knezek, and L. Zavrel. Promenlivost lomove-mechanickych vlastností cementového kompozitu se sklenenymi vlákny. In J. Lederová, J. Knezek, and M. Svoboda, editors, IX. konference Vyzkumného ústavu stavebních hmot: Ekologie a nové stavební hmoty a vyrobky, pages 194–198, Telc, Czech Republic, 2005. VUSTAH.

[Vesely et al., 2002]

V. Vesely, Z. Kersner, M. Stibor, and M. Vorechovsky. Efektivní hodnota lomové houzevnatosti z krychle se zárezy (Effective fracture toughness on notched cubes). In Stanislav Kmet and V. Kristofovic, editors, VII International Scientific Conference, Section 9: Structural Mechanics, pages 300–304, Kosice (Medzev), Slovak Republic, 2002.

[Vorechovsky and Cervenka, 2002]

M. Vorechovsky and V. Cervenka. ATENA 2D - Uzivatelsky manuál. Technical report, Cervenka Consulting, Prague, Czech Republic, 2002.

[Vorechovsky and Chudoba, 2004]

M. Vorechovsky and R. Chudoba. Stochastické modelování mnohovláknitych svazk r u pro vyztuzení betonu. In D. Novák and S. Vejvoda, editors, PPK 2004 Pravdepodobnost porusování konstrukcí, pages 77–84, Brno, Czech Republic, 2004. Brno University of Technology, Faculty of Civil Engineering & Ústav aplikované mechaniky Brno, s.r.o. & Asociace strojních inzenyr r u & TERIS, a.s., pobocka Brno.

[Vorechovsky and Chudoba, 2005a]

M. Vorechovsky and R. Chudoba. Numerical modeling of delayed activation and statistical size effect in multifilament yarns. In Vlastimil Bílek and Zbynek Kersner, editors, 2^nd International symposium Nontraditional cement & concrete, pages 439–449, Brno, Czech Republic, 2005. Brno University of Technology.

[Vorechovsky and Chudoba, 2005b]

M. Vorechovsky and R. Chudoba. Statistical length scale for micromechanical model of multifilament yarns and size effect on strength. In G. Augusti, G. I. Schuëller, and M. Ciampoli, editors, ICoSSaR '05 the 9 ^th International Conference on Structural Safety and Reliability, pages 395–401, Rome, Italy, 2005. Millpress Rotterdam, Netherlands.

[Vorechovsky and Chudoba, 2006]

Miroslav Vorechovsky and Rostislav Chudoba. Stochastic modeling of multi-filament yarns: II. Random properties over the length and size effect. International Journal of Solids and Structures, 43(3-4):435–458, 2006.

[Vorechovsky and Kala, 2001]

M. Vorechovsky and Z. Kala. Nevyrovnanost pravdepodobnosti poruchy podle konceptu EC 1 (Unbalanced reliability using concept of Eurocode 1). In Reliability of Structures, 2^nd International Conference, Faculty of Civil Engineering, Ostrava University of Technology, pages 141–144, Ostrava, Czech Republic, 2001. Academy of Sciences – Institute of Theoretical and Applied Mechanics of the ASCR Prague.

[Vorechovsky and Matesová, 2006a]

M. Vorechovsky and D. Matesová. Interplay of size effects in concrete specimens by computational stochastic fracture mechanics. In Jirm Náprstek and Cyril Fischer, editors, Engineering Mechanics 2006, pages 1–15, Extended Abstract: 434–435, Svratka, Czech Republic, 2006. Institute of Theoretical and Applied Mechanics, Academy of Sciences of the Czech Republic, Prague.

[Vorechovsky and Matesová, 2006b]

M. Vorechovsky and D. Matesová. Modelování vlivu velikosti betonovych konstrukcí pomocí nelineární stochastické lomové mechaniky. In Vejvoda et al., editor, PPK 2006 Pravdepodobnost porusování konstrukcí, pages 269–284, Brno, Czech Republic, 2006. Brno University of Technology, Faculty of Civil Engineering and Faculty of Mechanical Engineering& Ústav aplikované mechaniky Brno, s.r.o. & Asociace strojních inzenyr r u & TERIS, a.s., pobocka Brno.

[Vorechovsky and Matesová, 2006c]

Miroslav Vorechovsky and Dita Matesová. Interplay of sources of size effects in concrete specimens. In E. E. Gdoutos, editor, Fracture of Nano and Engineering Materials and Structures, Proceedings of the 16^th European Conference of Fracture, pages 1365–1366 (Abstract), full length paper on CD–ROM, Alexandroupolis, Greece, 2006. Springer.

[Vorechovsky and Matesová, 2006d]

Miroslav Vorechovsky and Dita Matesová. Size effect in concrete specimens under tension: interplay of sources. In Meschke, de Borst, Mang, and Bicanic, editors, EURO-C 2006 Computational Modelling of Concrete Structures, pages 905–914, Mayrhofen, Austria, 2006. Taylor & Francis Group, London.

[Vorechovsky and Novák, 2001]

M. Vorechovsky and D. Novák. Probability of failure using reliability design concept of Eurocodes. In TRANSCOM '2001 – 4 ^th European Conference of Young Research and Science Workers in Transport and Telecommunications, pages CD–ROM proc., Zilina, Slovak Republic, 2001. EDIS Press.

[Vorechovsky and Novák, 2002]

M. Vorechovsky and D. Novák. Correlated random variables in probabilistic simulation. In Peter Schießl, Norbert Gebbeken, Manfred Keuser, and Konrad Zilch, editors, 4^th International Ph.D. Symposium in Civil Engineering, volume 2, pages 410–417, Munich, Germany, 2002. Millpress, Rotterdam.

[Vorechovsky and Novák, 2003a]

M. Vorechovsky and D. Novák. Efficient random fields simulation for stochastic FEM analyses. In K. J. Bathe, editor, 2^nd M.I.T. Conference on Computational Fluid and Solid Mechanics, pages 2383–2386, Cambridge, USA, 2003. Elsevier Science Ltd., Oxford, UK.

[Vorechovsky and Novák, 2003b]

Miroslav Vorechovsky and Drahomír Novák. Statistical correlation in stratified sampling. In A. Der Kiureghian, S. Madanat, and J. M. Pestana, editors, ICASP 9, International Conference on Applications of Statistics and Probability in Civil Engineering, pages 119–124, San Francisco, USA, 2003. Millpress, Rotterdam.

[Vorechovsky and Novák, 2004]

M. Vorechovsky and D. Novák. Modeling statistical size effect in concrete by the extreme value theory. In J. Walraven, J. Blaauwendaad, T. Scarpas, and B. Snijder, editors, 5^th International Ph.D. Symposium in Civil Engineering, volume 2, pages 867–875, Delft, The Netherlands, 2004. A.A. Balkema Publishers, London.

[Vorechovsky and Novák, 2005]

M. Vorechovsky and D. Novák. Simulation of random fields for stochastic finite element analyses. In G. Augusti, G. I. Schuëller, and M. Ciampoli, editors, ICoSSaR '05 the 9 ^th International Conference on Structural Safety and Reliability, pages 2545–2552, Rome, Italy, 2005. Millpress Rotterdam, Netherlands.

[Vorechovsky and Novák, 2006]

Miroslav Vorechovsky and Drahomír Novák. Correlation control in small sample Monte Carlo type simulation. Part I: Optimization technique simulated annealing. Probabilistic Engineering Mechanics, page in review, 2006.

[Vorechovsky and Routil, 2006]

M. Vorechovsky and L. Routil. Stanovení lomove-mechanickych vlastností hutnych a lehcenych kompozitních materiál r u. Technical report, Institute of Engineering Mechanics, Faculty of Civil Engineering, Brno University of Technology, Czech Republic, 2006. Zpráva o resení za rok 2006.

[Vorechovsky et al., 2000]

M. Vorechovsky, D. Novák, R. Pukl, and V. Cervenka. Modelovánm vlivu velikosti nosníku na jeho únosnost prostredky nelineární lomové mechaniky - SBETA/ATENA. In Betonárské Dny 2000 (Concrete Days 2000), pages 375–379, Pardubice, Czech Republic, 2000. CBZ.

[Vorechovsky et al., 2002a]

M. Vorechovsky, D. Novák, and R. Rusina. A new efficient technique for samples correlation in Latin Hypercube Sampling. In Stanislav Kmet and Pavlus Miron, editors, VII International Scientific Conference, Section 1: Applied Mathematics, pages 102–108, Kosice, Slovak Republic, 2002. Technical University of Kosice.

[Vorechovsky et al., 2002b]

M. Vorechovsky, R. Pukl, V. Vesely, Cervenka V., and R. Rusina. Statistical nonlinear analysis of concrete structures. In R.K. Dhir, M. R. Jones, and L. Zheng, editors, International Congress on Challenges of Concrete Construction, Seminar 3, pages 217–226, Dundee, Scotland, 2002.

[Vorechovsky et al., 2002c]

M. Vorechovsky, V. Vesely, and R. Pukl. Statistical nonlinear analysis of concrete structures. In Stanislav Kmet and V. Kristofovic, editors, VII International Scientific Conference, Section 9: Structural Mechanics, pages 308–313, Kosice (Medzev), Slovak Republic, 2002. Technical University of Kosice.

[Vorechovsky et al., 2005a]

M. Vorechovsky, Z. P. Bazant, and D. Novák. Procedure of statistical size effect prediction for crack initiation problems. In Alberto Carpinteri, editor, ICF XI 11^th International Conference on Fracture, pages CD–ROM proc, abstract page 1166, Turin, Italy, 2005. Politecnico di Torino.

[Vorechovsky et al., 2005b]

M. Vorechovsky, Z. P. Bazant, and D. Novák. Procedure of statistical size effect prediction for crack initiation problems. In Vlastimil Bílek and Zbynek Kersner, editors, 2^nd International symposium Nontraditional cement & concrete, pages 433–438, Brno, Czech Republic, 2005. Brno University of Technology.

[Vorechovsky et al., 2006a]

M. Vorechovsky, R. Chudoba, and J. Jerábek. Adaptive probabilistic modeling of localization, failure and size effect of quasi-brittle materials. In C.A. Soares, J.A.C. Martins, H.C. Rodrigues, J.A.C. Ambrósio, C.A.B. Pina, C.M.M. Soares, E.B.R. Pereira, and J. Folgado, editors, III European Conference on Computational Mechanics (ECCM-2006), page 286 (abstract), Lisbon, Portugal, 2006. National Laboratory of Civil Engineering, Springer. Full papers on CD-ROM.

[Vorechovsky et al., 2006b]

M. Vorechovsky, J. Jerábek, and R. Chudoba. Impact of scatter of material properties on the yarn performance in TRC. In Josef Hegger, Wolfgang Brameshuber, and Norbert Will, editors, 1 ^{tiny st} International RILEM Conference on Textile Reinforced Concrete, pages 285–294, RWTH Aachen University, Germany, 2006.

[Vorechovsky et al., 2006c]

M. Vorechovsky, M. Konrad, and R. Chudoba. Multiple cracks bridged by multifilament yarns: impact of local scatter on ultimate load. In A.M. Brandt, V.C. Li, and I.H. Marshall, editors, BMC8 Eighth International Symposium on Brittle Matrix Composites, pages 361–372, Warsaw, Poland, 2006. Woodhead Publishing Limited, Cambridge.

[Vorechovsky et al., 2007]

M. Vorechovsky, Rostislav Chudoba, Vera Hanisch, and Jakub Jerábek. Effect of twist, fineness, loading rate and length on tensile behavior of multifilament yarns (a multivariate study). Textile Research Journal, page in review, 2007.

[Vorechovsky, 2000a]

M. Vorechovsky. K problematice vypoctu spolehlivosti u nelineárních úloh mechaniky kontinua (On reliability computations of nonlinear continuum mechanics problems). Master's thesis, Institute of Structural Mechanics, Faculty of Civil Engineering, Brno University of Technology, Brno, Czech Republic, 2000. in Czech.

[Vorechovsky, 2000b]

Miroslav Vorechovsky. Probabilistic analysis of steel frames focused on design concept of Eurocodes. In Workshop 3RE, pages CD–ROM proc., Brno, Czech Republic, 2000. Institute of Structural mechanics, FCE, BUT Brno.

[Vorechovsky, 2001a]

M. Vorechovsky. Modelování vlivu velikosti na pevnost v tahu za ohybu u betonovych nosník r u (Modeling size effect on modulus of rupture of concrete beams). In 3^rd Scientific international PhD workshop, pages 145–148, Brno, Czech Republic, 2001. Brno University of Technology, Faculty of Civil Engineering.

[Vorechovsky, 2001b]

M. Vorechovsky. Moznosti vyuzití lomové mechaniky v kombinaci se stochastickymi metodami pri modelováni vlivu velikosti. In Dita Matesová, Zbynek Kersner, and Zdenek Knésl, editors, Problémy lomové mechaniky (Problems of Fracture Mechanics), pages 93–97, Academy of Sciences - Institute of physics of materials of the ASCR, 2001. Brno University of Technology.

[Vorechovsky, 2001c]

M. Vorechovsky. Pravdepodobnostní posouzení ocelové konstrukce podle EC 1 (probabilistic assessment of steel structure according to the Eurocode 1). In 3^rd Scientific international PhD workshop, pages 141–144, Brno, Czech Republic, 2001. Brno University of Technology, Faculty of Civil Engineering.

[Vorechovsky, 2002a]

M. Vorechovsky. FEM simulace predpjatych nosník r u a jejich statistické zpracování. In 4^th Scientific PhD international workshop, pages CD–ROM, Brno University of Technology, 2002.

[Vorechovsky, 2002b]

M. Vorechovsky. Lomove-mechanické parametry betonu jako vzajemne korelovaná náhodná pole. In Miroslav Stibor, editor, Problémy lomovi mechaniky II (Problems of Fracture Mechanics II), pages 84–90, Academy of Sciences - Institute of physics of materials of the ASCR, 2002. Brno University of Technology.

[Vorechovsky, 2002c]

M. Vorechovsky. Moznosti a vylepsení simulacní metody LHS. In 4^th Scientific PhD international workshop, pages CD–ROM, Brno University of Technology, 2002.

[Vorechovsky, 2002d]

M. Vorechovsky. Nové úpravy simulacní metody Latin Hypercube Sampling a moznosti vyuzití. In Miroslav Stibor, editor, Problémy modelování, pages 83–90, Faculty of Civil Engineering VSB-TUO, Ostrava, Czech Republic, 2002. Brno University of Technology.

[Vorechovsky, 2003]

M. Vorechovsky. Application of extreme value theory for size effect of concrete structures. In 5^th Scientific international PhD workshop, pages CD–ROM proc., Brno, Czech Republic, 2003. Brno University of Technology, Faculty of Civil Engineering.

[Vorechovsky, 2004a]

M. Vorechovsky. Stabilita a konvergence numerickych metod pri simulaci extrémních hodnot rozdelení. In D. Novák and S. Vejvoda, editors, PPK 2004 Pravdepodobnost porusování konstrukcí, pages 257–264, Brno, Czech Republic, 2004. Brno University of Technology, Faculty of Civil Engineering & Ústav aplikované mechaniky Brno, s.r.o. & Asociace strojních inzenyr r u & TERIS, a.s., pobocka Brno.

[Vorechovsky, 2004b]

M. Vorechovsky. Statistical alternatives of combined size effect on nominal strength for structures failing at crack initiation. In Miroslav Stibor, editor, Problémy lomové mechaniky IV (Problems of Fracture Mechanics IV), pages 99–106, Academy of Sciences - Institute of physics of materials of the ASCR, 2004. Brno University of Technology. invited lecture.

[Vorechovsky, 2004c]

Miroslav Vorechovsky. Comparison of stability and accuracy of numerical simulation methods for simulation of statistics of extremes. Probabilistic Engineering Mechanics, under preparation, 2004.

[Vorechovsky, 2004d]

Miroslav Vorechovsky. Stochastic fracture mechanics and size effect. PhD thesis, Brno University of Technology, Brno, Czech Republic, 2004.

[Vorechovsky, 2005]

M. Vorechovsky. Pruznost a plasticita CD03-MO1 (Elasticity and Plasticity). Studijní opory pro studijní programy s kombinovanou formou studia (Lecture notes for students), 2005. in Czech.

[Vorechovsky, 2006a]

M. Vorechovsky. Correlation control in small sample Monte Carlo type simulation. Part II: Performance in and relevance to multivariate modelling. Probabilistic Engineering Mechanics, Unknown Vol.(Unknown No.):in review, Unknown Month 2006. Note: Vol., No. and month unknown and to be filled by the Editor.

[Vorechovsky, 2006b]

M. Vorechovsky. Hierarchical Subset Latin Hypercube Sampling. In Vejvoda et al., editor, PPK 2006 Pravdepodobnost porusování konstrukcí, pages 285–298, Brno, Czech Republic, 2006. Brno University of Technology, Faculty of Civil Engineering and Faculty of Mechanical Engineering& Ústav aplikované mechaniky Brno, s.r.o. & Asociace strojních inzenyr r u & TERIS, a.s., pobocka Brno.

[Vorechovsky, 2006c]

M. Vorechovsky. Interplay of size effects in concrete specimens under tension studied via computational stochastic fracture mechanics. International Journal of Solids and Structures, page in press, 2006. (DOI)

[Vorechovsky, 2006d]

M. Vorechovsky. Performance study of correlation control in Monte Carlo type simulation. In 3 ^{tiny rd} PhD Workshop Brno-Prague-Weimar, also ISM-Bericht 1/2006 Bauhaus-Univeristät Weimar, pages 35–38, Weimar, Germany, 2006.

[Vorechovsky, 2006e]

Miroslav Vorechovsky. Korekce zatezovacích drah na netuhych lisech. In Jana Pejchalová, Jirí Kala, and Zbynek Kersner, editors, Smerování kateder/ústavu STM stavebních fakult CR a SR 2005/2006, pages 93–97, Mikulov, Czech Republic, 2006. Brno University of Technology, Fac. of Civil Engrg., Institute of Struct. Mech.

[Vorechovsky, 2006f]

Miroslav Vorechovsky. Size effects in concrete specimens studied via stochastic fracture mechanics. Engineering mechanics, 13(5):385–401, 2006.

[Vorechovsky, 2006g]

Miroslav Vorechovsky. Statistical, sensitivity and reliability analyses: problem revision and software design. In Jana Pejchalová, Jirí Kala, and Zbynek Kersner, editors, Smerování kateder/ústavu STM stavebních fakult CR a SR 2005/2006, pages 81–92, Mikulov, Czech Republic, 2006. Brno University of Technology, Fac. of Civil Engrg., Institute of Struct. Mech.

[Vorechovsky, 2007a]

M. Vorechovsky. Modeling statistical size effect in quasibrittle materials by computational stochastic fracture mechanics. In ICASP 10, 10 ^{tiny th} International Conference on Applications of Statistics and Probability in Civil Engineering, page in print, Kashiwa Campus, The University of Tokyo, Tokyo, Japan, July–August 2007. The University of Tokyo.

[Vorechovsky, 2007b]

M. Vorechovsky. Simulation of simply cross correlated random fields by series expansion methods. In ICASP 10, 10 ^{tiny th} International Conference on Applications of Statistics and Probability in Civil Engineering, page in print, Kashiwa Campus, The University of Tokyo, Tokyo, Japan, July–August 2007. The University of Tokyo.

[Vorechovsky, 2007c]

Miroslav Vorechovsky. Simulation of simply cross correlated random fields by series expansion methods. Structural safety, page in review, 2007.

[Vorechovsky, 2007d]

Miroslav Vorechovsky. Stochastic computational mechanics of quasibrittle structures. Habilitation thesis presented at Brno University of Technology, Brno, Czech Republic, 2007.