4th International Conference

June 27--30, 2011
Brno, Czech Republic

Brno University of Technology
and
ZPSV, a.s.

Background    Topics    Organisation of the Conference    Advisory Panel    Call for Papers    Calendar    Camera-ready Paper Instructions    Final Programme    Accepted Abstracts / Poster Presentations    Location    Accommodation    Registration Fee    Way of Payment    Organising Committee    Contact Address

The sustainable development of the building industry as well as new applications require concretes of specific properties. These concretes prove useful in terms of laboratory testing, but difficulties arise in their practical application and in behaviour prediction as they diverge from common routines, norms and recommendations. The putting of non-traditional concretes into practice represents therefore an interdisciplinary problem. The conference will focus on the exchange of the experience of the research, preparation, testing and application of these materials.

We know that today’s non traditional cements and concretes may become traditional tomorrow. It would be a wonderful thing if this conference also contributed its share towards this goal.

The Conference is organised by Brno University of Technology and ZPSV, a.s. (Railway Industrial Building Production), and it is supported by the Czech Concrete Society (CBS). This partnership between the University and the production company demonstrates that the Conference is focused on both theoretical and practical problems in the field of non-traditional cements and concretes (NTCC) within the activities of the CIDEAS research centre (1M0579).

Camera-ready paper instructions are introduced in files NTCC2011_CameraReadyPaper.pdf & .doc. Deadline for submission of camera-ready papers is April 30, 2011.

At this moment a final programme is available: NTCC2011_FinalProgramme.pdf.

A. ALLAHVERDI & M. SAFFARI, Iran
ENHANCEMENT OF CEMENTING PROPERTIES OF FLY ASH-PORTLAND CEMENT BLEND WITH A SOLID COMPOUND ACTIVATOR

A. ALLAHVERDI & M. SAFFARI, Iran
CHEMICAL ACTIVATION OF PHOSPHOROUS SLAG WITH A SOLID COMPOUND ACTIVATOR

A. ALLAHVERDI & M. SAFFARI, Iran
IMPARTING CEMENTING PROPERTIES TO NATURAL POZZOLAN WITH A SOLID COMPOUND ACTIVATOR

A. ALLAHVERDI & M. SAFFARI, Iran
MAGNESIUM SULPHATE ATTACK ON ALKALI-ACTIVATED SLAG MORTAR

A. ALLAHVERDI & M. SAFFARI, Iran
PROPORTIONING BLAST FURNACE SLAG BLENDED PORTLAND CEMENT FOR INDUSTRIAL PRODUCTION PURPOSES

A. ALLAHVERDI & M. SAFFARI, Iran
SILICOMANGANESE SLAG AS A SUPPLEMENTARY CEMENTING MATERIAL

A. ALLAHVERDI & M. SAFFARI, Iran
SODIUM SULPHATE ATTACK ON ALKALI-ACTIVATED SLAG MORTAR

M. M. ALONSO, M. PALACIOS & F. PUERTAS, Spain
COMPATIBILITY BETWEEN POLYCARBOXYLATE-BASED ADMIXTURES AND CEMENT PASTES WITH MINERAL ADDITIONS

O. ARIOZ, K. KILINC, M. TUNCAN, A. RUNCÁN & T. KAVAS, Turkey
UTILISATION OF FLY ASH IN GEOBRICKS PRODUCED BY PRESSURE FORMING PROCESS

S. BAKHTIYARI, A. ALLAHVERDI, M. RAIS-GHASEMI & T. PARHIZKAR, Iran
AN INVESTIGATION ON THE INFLUENCE OF THE PERMANENT EXPANDED POLYSTYRENE FORMWORK ON COMPRESSIVE STRENGTH AND FIRE RESISTANCE OF SELF-COMPACTING CONCRETES

M. BOHÁČ, T. STANĚK & P. SULOVSKÝ, Czech Republic
PROPERTIES OF CEMENT-BASED COMPOSITES WITH NANO-SIZED TITANIUM DIOXIDE

M. COLLEPARDI, S. COLLEPARDI, D. ONGARO, A. QUADRIO CURZIO & M. SAMMARTINO, Italy
CONCRETE WITH BOTTOM ASH FROM MUNICIPAL SOLID WASTES INCINERATORS

CH. DENAYER, Belgium
A NEW GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL (ETA) OF CALCIUM CARBONATE FINES (CCF) AS A BINDER WITH A K-VALUE, REDUCING THE CO2-FOOTPRINT OF CONCRETE

I. FRÝBORTOVÁ & P. ROVNANÍK, Czech Republic
THERMAL RESISTANCE OF ALKALI ACTIVATED BLAST FURNACE SLAG COMPOSITE WITH CHAMOTTE AGGREGATES

M. G. GABIDULLIN & R. Z. RAKHIMOV, Russia
DEVELOPMENT OF COMPOSITIONS AND TECHNOLOGY OF FIBER REINFORCED HIGH-STRENGTH AND WATER RESISTING CONCRETE BLOCKS FOR LINING RUNNING TUNNELS OF KAZAN UNDERGROUND

M. G. GABIDULLIN & R. Z. RAKHIMOV, Russia
SCIENTIFIC AND TECHNOLOGICAL FRAMEWORK FOR THE MANAGEMENT OF STRUCTURE OF CERAMSITE CONCRETE ON BAKING BINDING

M. S. GARKAVI, S. S. SHLENKINA, S. Z. GARKAVI & I. S. HRIPACHEVA, Russia
MINING OF RATIONAL COMPOSITIONS OF MIXED CEMENTS

H. Y. GHORAB, H. E. H. AHMED & A. TAWFIK, Egypt
THE PRODUCTION OF METAKAOLIN AS CEMENT REPLACEMENT MATERIAL IN EGYPT

Z. GIERGICZNY, T. PUŻAK, M. SOKOŁOWSKI & D. DZIUK, Poland
THE INFLUENCE OF GRINDING ON THE EFFICIENCY OF MINERAL ADDITIVES IN THE COMPOSITION OF CEMENT AND CONCRETE

J. GOŁASZEWSKI, T. PONIKIEWSKI & A. KOSTRZANOWSKA, Poland
INFLUENCE OF HIGH – CALCIUM FLY ASHES ON RHEOLOGICAL PROPERTIES OF FRESH MORTARS

E. GRUYAERT & N. DE BELIE, Belgium
HYDRATION DEGREE OF CEMENT AND SLAG IN SLAG BLENDED CEMENT PASTES

S. GRZESZCZYK & B. SKALIŃSKI, Poland
THE INFLUENCE OF ANTI-WASHOUT ADMIXTURES ON THE PROPERTIES OF SELF-FLOWING UNDERWATER CONCRETE MIXTURES

S. G. GUZIY, Ukraine
THE INFLUENCE OF SILICEOUS GEOCEMENT CONSTITUENT ON RHEOLOGICAL AND PHYSICO-MECHANICAL PROPERTIES

G. HABERT, J. B. D’ESPINOSE DE LACAILLERIE & N. ROUSSEL, France
GEOPOLYMER BASED CONCRETE: ENVIRONMENTAL IMPACTS OF CURRENT RESEARCH TRENDS

S. HAYROYAN & A. ATARPURI, Armenia, Iran
CREEP OF CEMENTOSOILS DURING COMPRESSION

R. HELA, J. ZACH & M. SEDLMAJER, Czech Republic
UTILIZATION OF METAKAOLIN AS A REPLACEMENT FOR CEMENT IN THE ULTRA-LIGHTWEIGHT THERMAL-INSULATING PLASTERS

A. HERNÁNDEZ, N. TORRES & P. QUIROGA, Colombia
IMPEDANCE SPECTROSCOPY AS A NOVEL METHOD TO CORRELATE MECHANICAL PROPERTIES OF CONCRETE WITH DIFFERENT ADDITIONS

P. HOLUBOVÁ & D. KOLOUŠEK, Czech Republic
COMPRESSION STRENGTH OF HYDROTERMAL ALTERED GEOPOLYMERS

M. CHROMÁ, M. VYŠVAŘIL, D. VOŘECHOVSKÁ, P. BAYER & P. ROVNANÍKOVÁ, Czech Republic
CONCRETE REHYDRATION – 6 MONTHS AFTER HEATING

V. ISRAELYAN, T. SARKISYAN & A. SAFARYAN, Armenia
ABOUT POSSIBILITY OF LIGHTWEIGHT CONCRETES HOMOGENEITY PROVIDING BY AGGREGATES PROCESSING

I. JANOTKA & Ľ. KRAJČI, Slovakia
PASSIVATION ABILITY OF THE MORTARS CONTAINING DIFFERENT CEMENT KINDS

S. A. KASHCHEEVA & M. S. GARKAVI, Russia
THE PRODUCTION OF REDUCED WATER REQUIREMENT CEMENTS IN CENTRIFUGAL IMPACT MILLS

M. I. KHALIULLIN, R. Z. RAKHIMOV & A. R. GAJFULLIN, Russia
COMPOSITIONAL GYPSUM BINDINGS OF THE HEIGHTENED WATER RESISTANCE WITH ACTIVE MINERAL ADDITION - HAYDITE DUST

K. KILINC, A. O. CELIK, M. TUNCAN, A. RUNCÁN & O. ARIOZ, Turkey
DETERMINATION OF CONCRETE STRENGTH BY USING SMALL DIAMETER CORES AND MICROCORES

M. KOMLJENOVIĆ, Z. BAŠČAREVIĆ & V. NIKOLIĆ, Serbia
DEVELOPMENT OF FLY ASH-BASED GEOPOLYMER MICROSTRUCTURE AT ROOM TEMPERATURE

D. L. Y. KONG & J. G. SANJAYAN, Australia
BEHAVIOR OF GEOPOLYMER CONCRETE SUBJECTED TO HYDROCARBON FIRE

A. L. KRISHAN & E. A. TROSHKINA, Russia
CONCRETE FILLED STEEL TUBE COLUMNS WITH PRELIMINARY COMPRESSED CONCRETE CORE

P. V. KRIVENKO, A. G. GELEVERA & Y. V. FEDORENKO, Ukraine
ALKALINE CORROSION OF CONCRETE

P. V. KRIVENKO, S. G. GUZIY, J. SUSSMILCH, L. GRICH & P. FABIAN, Ukraine, Czech Republic
EXPERIENCE FROM USE OF CORROSION RESISTANT GEOCEMENT-BASED COATINGS

P. KRIVENKO, G. KOVALCHUK, O. KOVALCHUK & V. GRABOVCHUK, Ukraine
ALKALINE FLY-ASH CEMENTS AND CONCRETES: INFLUENCE OF WITHDRAWAL ON EARLY STAGE OF HARDENING

P. V. KRIVENKO, O. N. PETROPAVLOVSKYY & V. I. PUSHKAR, Ukraine
COLOURED ALKALI- ACTIVATED CEMENTS FOR DECORATIVE CONCRETES

P. V. KRIVENKO, O. N. PETROPAVLVSKYY, G. V. VOZNIUK, Ukraine
SMALL-SIZE ARCHITECTURAL ELEMENTS FROM DECORATIVE SLAG ALKALI- ACTIVATED CEMENT CONCRETE CAST UNDER VIBRATION

Y. R. KRIVOBORODOV & D. V. GERBER, Russia
PROPERTIES OF SELFPACKING CONCRETE WITH THE COMPLEX ADDITIVES

U. R. KRIVOBORODOV & T. V. KOUZNETSOVA, Russia
THE PERFECTION OF SERVICE PROPERTIES OF BUILDING MATERIAL ON THE BASIS OF WATER GLASS

B. ŁAŹNIEWSKA-PIEKARCZYK, Poland
INFLUENCE OF ANTI-FOAMING ADMIXTURE ON POROSITY CHARACTERISTIC OF SELF-COMPACTING CONCRETE AFFECTING ITS FROST-RESISTANCE AND COMPRESSIVE STRENGTH

D. LOGOŃ, Poland
QUALITY CONTROL OF CEMENT MIXES USING CUBE FLOW AND ELECTRICAL RESISTANCE TESTS

D. LOGON, Poland
THE ROPE EFFECT IN HPFRC CEMENT COMPOSITES

S. V. MAZMANYAN & V. R. ISRAELYAN, Armenia
HYDRATION OF CEMENT ON NON-TRADITIONAL HYDRAULIC ADDITIVE

I. NETINGER, D. BJEGOVIĆ, M. J. RUKAVINA & M. SERDAR, Croatia
PROPERTIES OF STEEL SLAG AGGREGATES CONCRETE

M. PALOU & T. IFKA, Slovakia
INFLUENCE OF PARTICLE SIZE OF CLINKER MINERALS UPON THE HYDRATION OF SULPHOALUMINATE BELITE CEMENTS

S. PAVLENKO, Russia
NEW CEMENTLESS BINDER FROM FLY ASHES BY THERMAL ELECTRIC STATION

J. PODROUZEK, D. VORECHOVSKA & B. TEPLY, Czech Republic
NEIGHBOURHOOD MODELLING OF HEAT TRANSFER IN CONCRETE

J. PROKEŠ, Czech Republic
LONG-FIBRE REINFORCED GEOPOLYMER MATRIX MODIFIED WITH ORGANIC RESINS

F. PUERTAS, J. J. TORRES, C. VARGA, M. PALACIOS, E. MORENO, J. G. PALOMO, T. VÁZQUEZ & A. GOROSVOSKY, SPAIN, Russia
MECHANICAL BEHAVIOUR OF ALKALI-ACTIVATED BFS/GLASS WASTES MIXTURES

E. K. PUSHKAROVA, O. A. GONCHAR & A. I. BORISOVA, Ukraine
PHYSICO-CHEMICAL PARTICULARITIES OF AN ALKALINE ALUMINOSILICATE COMPOSITIONS MODIFIED BY FERROUS AND MAGNESIUM ADDITIVES

P. QUIRITA & N. TORRES, Columbia
COMPARISON OF THE PERFORMANCE OF STRUCTURAL ELEMENTS MADE WITH REGULAR CONCRETE AND CONCRETE WITH RECYCLED AGGREGATES IN COLOMBIA

H. RAHIER, M. ESAIFAN, J. WASTIELS, F. SLATYI, I. ALDABSHEH AND H. KHOURY, Belgium, Jordan
ALKALI ACTIVATION OF KAOLINITE FOR PRODUCTION OF BRICKS AND TILES

R. RAKHIMOV, N. RAKHIMOVA & M. RAKHIMOV, Russia
HOOP’S BLOCKS FOR THE TUBE RAILWAY TUNNEL LINING ON THE BASE OF THE DEFFERENT KINDS OF THE CONCRETES AND PRODUCTION TECHNOLOGY OF THEM

N. RAKHIMOVA, Russia
INVESTIGATIONS ON THE PHASE COMPOSITION AND STRUCTURE, STRUCTURE MODELING OF THE STONE ON THE BASE OF THE COMPOSITIONAL SLAG-ALKALINE BINDING WITH ADDING AS A CERAMIC BRICKS BREAKAGE

P. ROVNANÍK, Czech Republic
FLY ASH GEOPOLYMER AFTER EXPOSURE TO ELEVATED TEMPERATURE: MECHANICAL PROPERTIES AND MICROSTRUCTURE

P. ROVNANÍK, P. BAYER & P. ROVNANÍKOVÁ, Czech Republic
MICROSTRUCTURAL ASPECTS OF HIGH TEMPERATURE TREATMENT OF ALKALI ACTIVATED SLAG

P. ROVNANÍKOVÁ, P. BAYER & P. ROVNANÍK, Czech Republic
RESISTIVITY OF CONCRETE WITH BRICK PODER

R. F. RUNOVA, I. I. RUDENKO & A. P. KONSTANTINOVSKYI, Ukraine
INFLUENCE OF CHEMICAL ADMIXTURES ON CHARACTERISTICS OF HEAT-CORROSION RESISTANT MASONRY MORTARS BASED ON ALKALI-ACTIVATED CEMENTS

B. ŘEZNÍK & P. ROVNANÍKOVÁ, Czech Republic
PROPERTIES OF ALKALI ACTIVATED FLY ASH WITH RESPECT TO SILICATE MODULUS OF ACTIVATOR

D. SAJE, B. BANDELJ, B. M. SAJE, J. ŠUŠTERŠIČ, J. LOPATIČ & F. SAJE, Slovenija
THE INFLUENCE OF LENGTH AND VOLUMETRIC CONTENT OF STEEL FIBRES ON SHRINKAGE OF HIGH PERFORMANCE STEEL FIBRE REINFORCED CONCRETE

S. V. SAMCHENKO & T. V. KOUZNETSOVA, Russia
UTILIZATION OF WATER TREATMENT WASTE FOR PRODUCTION OF ALUMINA CEMENT

M. SANYTSKY, O. POZNIAK, B. ROUSSYN, A, SZYMANEK & J. SZYMANSKA, Ukraine, Poland
CONCRETE BASED ON MODIFIED CEMENTITIOUS SYSTEM WITH FINE GROUND MINERAL ADDITIVES

E. A. SHABALINA, G. I. YAKOVLEV, G. N. PERVUSHIN & D. DROCHYTKA, Russia, Czech Republic
COMPOSITE MATERIAL ON BASIS OF PEAT AND MAGNESIA BINDER

M. DE SCHEPPER, P. VAN DEN HEEDE, CH. WINDELS & N. DE BELIE, Belgium
LIFE CYCLE ASSESSMENT OF COMPLETELY RECYCLABLE CONCRETE

M. STEINEROVA, Czech Republic
MECHANICAL PROPERTIES OF COMPOSITES BASED ON METAKAOLINITE GEOPOLYMER MATRIX IN RELATION TO THEIR POROUS STRUCTURE AND AMOUNT OF GEL FORMING COMPONENTS

A. TAKAHASHI, CH. HASHIMOTO, T. WATANABE & K. ISHIMARU, Japan
DEVELOPMENT OF HIGH PERFORMANCE MORTAR HAVING THE EFFECTS ON REDUCTION OF SURFACE TEMPERATURE

N. TORRES CASTELLANOS, J. TORRES AGREDO & R. MEJÍA DE GUTIÉRREZ, Columbia
COMPARATIVE STUDY OF THE PERFORMANCE OF CONCRETE ADDED WITH FLUID CATALYTIC CRACKING CATALYST RESIDUE (FCC) AND METAKAOLIN (MK)

R. TROLI & M. COLLEPARDI, Italy
SHRINKAGE-COMPENSATING CONCRETES FOR SPECIAL STRUCTURES

V. TURCHIN & L. YUDINA, Russia
SLAG ALKALINE COMPOSITION FOR BUILDING STRUCTURES

A. USHEROV-MARSHAK & V. SOPOV, Ukraine
POROMECHANICS OF CEMENT STONE

Y. WANG, G. YE & K. VAN BREUGEL, Netherlands, Belgium
INFLUENCES OF MICRONIZED SANDS ON DURABILITY IN CEMENTITIOUS MATERIAL

The 4th International Conference Non-Traditional Cement and Concrete will be held from 27th to 30th June 2011 in Brno. Brno is the second largest city in the Czech Republic and the metropolis of South Moravia. About 400.000 people live there. There are many cultural, historical and other sights (see for example http://www.brno.cz/).

Brno is located 200 km from Prague and 150 km from Vienna (Austria). There are international airports in both of the cities. Many express trains and buses connect these cities with Brno.

Brno also has international airport but only with connection to Prague and limited number of international flights (Moscow, Barcelona, London), but there are also some charter flights – see http://www.airport-brno.cz/.

The conference will be held at Hotel Continental Brno, Kounicova 6, 602 00 Brno, Czech Republic, http://www.continentalbrno.cz/ENG/. Special prices are offered for the symposium visitors. Please, write the “NTCC” code into the reservation form.

The registration fee will be 400 EURO. The fee includes the proceedings, dinners, and coffee at breaks, as well as cultural events and banquets.

Accompanying person fee is 150 EURO. The fee includes dinners, coffee at breaks, sightseeing tours, as well as cultural events and banquets.

A sightseeing trip is planned after the conference for participants and accompanying persons. The trip will be paid in site – 180 EURO.

Bank:		Československá obchodní banka
Address:		Milady Horákové 6
		601 79 Brno
		Czech Republic
Account No.:		111044081/0300
Variable code:		12100000
IBAN:		CZ3003000000000111044081
Swift code:		CEKO-CZ-PP
Full name of organization:		Vysoké učení technické v Brně

Please send copy of payment to bilek@zpsv.cz. Note: ICO 00216305 and DIC CZ00216305 are used in case of payment from Czech Republic.