6^th International Conference

June 19–22, 2017
Brno, Czech Republic

Brno University of Technology
and
VSB–TUO: Technical University of Ostrava
and
ZPSV, a.s.
and
Institute of Physics of Materials, Academy of Sciences of the Czech Republic

Background    Topics    Organisation of the Conference    Honorary Advisory Panel    Advisory Panel    Call for Papers    Calendar    Camera-ready Paper – Templates, Publication Possibilities    Registration Form    Final Programme    Accepted Abstracts / Poster Presentations    Venue – Brno City    Registration Fee & Proceedings    Organising Committee    Contact Address

The sustainable development of the building industry as well as new applications require concretes of specific properties. These concretes prove useful in terms of laboratory testing, but difficulties arise in their practical application and in behaviour prediction as they diverge from common routines, norms and recommendations. The putting of non-traditional concretes into practice represents therefore an interdisciplinary problem. The conference will focus on the exchange of the experience of the research, preparation, testing and application of these materials.

We know that today´s non traditional cements and concretes may become traditional tomorrow. It would be a wonderful thing if even this conference contributed its share towards this goal.

The conference is organised by Brno University of Technology – Faculties of Civil Engineering and Chemistry, VSB–TUO: Technical University of Ostrava – Faculty of Civil Engineering, ZPSV, a.s. (Production of concrete elements), and Institute of Physics of Materials, Academy of Sciences of the Czech Republic, v. v. i., and it is supported by Czech Concrete Society (CBS). The connection of the Universities/Academy and the production company shows that the conference is focused on both theoretical and practical problems in the field of non-traditional cements and concretes.

Camera-ready paper templates can be downloaded as following files: 1) Supplementary paper (full text) NTCC2017_Template_for_Supplementary_papers.docx and 2) Abstract for publishing in the Conference Proceeding NTCC2017_Template_for_Abstracts.docx. Publication possibilities are introduced in the file NTCC2017_Possibility_of_publication.doc. Deadline for submission of camera-ready manuscripts is April 30, 2017.

Registration form can be downloaded as following file: NTCC2017_Registration_form.doc.

At this moment a final programme is available: NTCC2017_FinalProgramme.pdf.

H. S. ABDELGADER, S. A. ELAZHARI, S. TLIBA, Libya
DEVELOPMENT OF HEAVY WEIGHT CONCRETE USING LOCAL MATERIAL

J. T. AGREDO, S. G. RESTREPO, F. A. HINCAPIE, D. G. ALZATE, Colombia
PRELIMINARY STUDY ON THE USE OF A SECONDARY LEAD SMELTING SLAG AS AN ADDITION TO PORTLAND CEMENT

Q. ALAM, K. SCHOLLBACH, M. V. A FLOREA, H. J. H BROUWERS, The Netherlands
CHLORIDE LEACHING FROM MSWI BOTTOM ASH FINE PARTICLES (<= 125 µm)

N. ALHARBI, R. HAILSTONE, B. VARELA, USA
A MICROSCOPIC CHARACTERIZATION OF ALKALI ACTIVATED SLAG

M. BACUVCIK, P. MARTAUZ, I. JANOTKA, Slovakia
FIVE-YEAR OBSERVATION OF THE RESISTANCE OF NOVEL HYBRID CEMENT EXPOSED TO SULPHATE SOLUTION ATTACK

V. BILEK JR., L. KALINA, O. FOJTIK, Czech Republic
SHRINKAGE-REDUCING ADMIXTURE EFFICIENCY IN ALKALI-ACTIVATED SLAG MORTARS ACROSS THE DIFFERENT DOSES OF ACTIVATOR

B. BOTTERMAN, G. C. H. DOUDART DE LA GREE, M. C. J. HORNIKX, Q. L. YU, H. J. H. BROUWERS, The Netherlands
CHARACTERIZING, MODELLING AND OPTIMIZING THE SOUND ABSORPTION OF WOOD WOOL CEMENT BOARDS (WWCB)

R. CAJKA, J. VASKOVA, M. SMIRAKOVA, Czech Republic
STRESS AND STRAIN OF FIBER REINFORCED CONCRETE COMPOSITES

V. CAPRAI, M. V. A. FLOREA, H. J. H. BROUWERS, The Netherlands
EVALUATION OF STEAM CURING IN THE MECHANICAL AND LEACHING BEHAVIOUR OF FINE AGGREGATES, MADE WITH MSWI BOTTOM ASH

E. COHEN, G. BAR NES, A. PELED, Israel
DEVELOPMENT OF SUSTAINABLE ALTERNATIVE BUILDING MATERIALS FROM MINE TAILING

B. DHAMI, D. BHALANI, S. DEORUKHKAR, S. KHAN, S. REGO, G. PEREIRA, ER. SHRIKANT T. VARPE, India
CONCRETE SUSTAINABILITY USING BACTERIA: A FUTURE EXIGENCY OF CONSTRUCTION INDUSTRY

Z. DING, R. WANG, Y. LIU, J. MA, China
STUDY ON THE PREPARATION OF CARBONATED STEEL SLAG BRICKS UNDER THE MICROBIAL ENZYME ACTION

J. DOMSKI, J. KATZER, Poland
STRENGTH PROPERTIES OF SFRC BASED ON WCA TESTED WITH THE HELP OF ARAMIS DIGITAL IMAGE CORRELATION SYSTEM

G. C. H DOUDART DE LA GREE, V. CAPRAI, Q. L. YU, H. J. H BROUWERS, The Netherlands
FUNCTIONALIZED WOOD-WOOL CEMENT BOARDS FOR NOX ABATEMENT

J. E. S. EZECHIELS, Q. L. YU, K. SCHOLLBACH, H. J. H. BROUWERS, The Netherlands
THE EFFECT OF MISCANTHUS FIBER IN SUSTAINABLE BIO-CONCRETE DESIGN

G. FERRARI, M. MIYAMOTO, A. FERRARI, M. SECCO, Italy
DURABILITY OF CONCRETE MADE WITH RECYCLED AGGREGATES PRODUCED FROM RETURNED CONCRETE

M. V. A. FLOREA, L. C. QUAAS, H. J. H. BROUWERS, The Netherlands
INTERNAL CHLORIDE BINDING OF VARIOUS CEMENT PASTES IN RELATION TO HYDRATED PHASES

J. FORMOSA, A. MALDONADO-ALAMEDA, J. GIRO-PALOMA, J. S. FAGEDA, J. M. CHIMENOS, Spain
LIGHTWEIGHT PANEL FORMULATED WITH MAGNESIUM PHOSPHATE CEMENT AND NATURAL VEGETAL FIBRE

X. GAO, Q. L. YU, A. LAZARO, H. J. H. BROUWERS, The Netherlands, China
CHARACTERIZATION AND APPLICATION OF AN ALTERNATIVE OLIVINE NANO-SILICA BASED ACTIVATOR IN ALKALI ACTIVATED MATERIALS

F. GAUVIN, V. CAPRAI, Q. L. YU, H. J. H. BROUWERS, The Netherlands
APPLICATION OF PHOTO-CATALYTIC TECHNOLOGY ON WOOD WOOL CEMENT COMPOSITES FOR INDOOR AIR PURIFICATION

H. Y. GHORAB, H. E. H. AHMED, A. S. SHANOUR, H. M. A. WAHDAN, Egypt
THE THAUMASITE FORMATION IN PORTLAND LIMESTONE-BURNED CLAYS SYSTEM

J. GIRO-PALOMA, A. MALDONADO-ALAMEDA, J. FORMOSA, J. M. CHIMENOS1, L. BARBIERI, I. LANCELLOTTI, Spain, Italy
MUNICIPAL SOLID WASTE INCINERATION BOTTOM ASH AS A UNIQUE SOURCE FOR GEOPOLYMERS FORMULATION

D. J. GLAS, Q. L. YU, H. J. H. BROUWERS, The Netherlands
EFFECT OF DENSITY CLASS AND CEMENT EFFICIENCY OF STRUCTURAL LIGHTWEIGHT AGGREGATES CONCRETE

G. J. G. GLUTH, M. RÜNGER, P. HLAVACEK, P. STURM, H.-C. KÜHNE, Germany
DURABILITY-RELATED TRANSPORT COEFFICIENTS OF GEOPOLYMER MORTARS BASED ON FLY ASH, MICROSILICA AND GROUND GRANULATED BLAST FURNACE SLAG

P. VAN DEN HEEDE, B. VAN BELLEGHEM, M. A. ARAÚJO, J. FEITEIRA, N. DE BELIE, Belgium
SCREENING OF DIFFERENT ENCAPSULATED POLYMER-BASED HEALING AGENTS FOR CHLORIDE EXPOSED SELF-HEALING CONCRETE USING CHLORIDE MIGRATION TESTS

Y. HENDRIX, Y. ZHENG, A. M. KAJA, A. LAZARO Q. L. YU, H. J. H.BROUWERS, The Netherlands
DESIGN AND EVALUATION OF PHOTOCATALYTIC CONCRETE APPLYING NEWLY SYNTHESIZED TiO₂-SiO₂ NANO-COMPOSITES

E. VAN HEUVELN, Z. Y. QU, Q. L. YU, S. N. M. WIJTE, H. J. H. BROUWERS, The Netherlands, China
INVESTIGATION ON A LIGHTWEIGHT AGGREGATE CONCRETE WITH A HIGH STRENGTH TO DENSITY RATIO

E. HRUBESOVA, H. LAHUTA, M. MOHYLA, L. DURIS, M. PINKA, Czech Republic
ASSESSMENT OF FIBER REINFORCED CONCRETE SLAB AND SUBSOIL INTERACTION – EXPERIMENT AND NUMERICAL MODEL

N. HU, G. HÜSKEN, G. J. G. GLUTH, H.-C. KÜHNE, Germany
THE DEVELOPMENT OF AN ALKALI-ACTIVATED SLAG MORTAR FOR THE REPAIR AND STRENGTHENING OF BRIDGE STRUCTURES WITH EMPHASIS ON ITS CHLORIDE PENETRATION RESISTANCE – A PARAMETRIC STUDY

H. JUSTNES, Norway
DURABLE ALUMINIUM REINFORCED ENVIRONMENTALLY-FRIENDLY CONCRETE CONSTRUCTION – DARE2C

A. M. KAJA, Q. L. YU, H. J. H. BROUWERS, The Netherlands
THE EFFECT OF NANO-SILICA AND PORTLANDITE ADDITION ON MICROSTRUCTURE DEVELOPMENT OF HIGH VOLUME FLY ASH CEMENT PASTES

M. K. KANASHIRO, J. DE ANCHIETA RODRIGUES, L. I. L. DE FARIA, Brazil
BAUXITE RESIDUE – TRENDS IN SCIENTIFIC RESEARCH AND OPPORTUNITIES FOR ITS VALORISATION IN BRAZIL

H. KARIMI, Q. L. YU, H. J. H. BROUWERS, The Netherlands
EVALUATION OF A NOVEL CELLULOSE-BASED VISCOSITY MODIFYING ADMIXTURE IN RHEOLOGICAL PROPERTIES OF CEMENTITIOUS PASTES

A. KEULEN, P. J. T. KAKEBEEKE, S. GRÜNEWALD, H. J. H. BROUWERS, The Netherlands
DURABILITY EVALUATION OF AAM USING A PLASTICIZING ADDITIVE, ENHANCING FRESH CONCRETE RHEOLOGY

E. A. KHUDOVEKOVA, A. P. NEFED’EV, V. Y. SARANCHA, M. S. GARKAVI, D. M. LYZHIN, Russia
PROPERTIES OF SELF-COMPACTING CONCRETE MIXTURES CONTAINING METAKAOLIN AND BLAST FURNACE SLAG

K. KOCHOVA, K. SCHOLLBACH, H. J. H. BROUWERS, The Netherlands
INTERACTION EFFECT OF ORGANIC FIBRES ON THE CEMENT HYDRATION

P. KONECNY, P. LEHNER, P. GHOSH, Q. TRAN, Czech Republic, USA
VARIATION OF DIFFUSION COEFFICIENT FOR SELECTED BINARY AND TERNARY CONCRETE MIXTURES CONSIDERING CONCRETE AGING EFFECT

J. KOPLIK, T. SOLNY, L. KALINA, J. MASILKO, Czech Republic
IMMOBILIZATION OF Sr²⁺, Bi³⁺ AND Zn²⁺ IN ALKALI-ACTIVATED MATERIALS BASED ON BLAST FURNACE SLAG AND FLY ASH

£. KOTWICA, M. CHOREMBA£A, E. KAPELUSZNA, P. STÊPIEÑ, J. DEJA, £. GO£EK, Poland
EFFECT OF METAKAOLINITE ON PROPERTIES OF ALKALI ACTIVATED SLAG MATERIALS

£. KOTWICA, M. CHOREMBA£A, E. KAPELUSZNA, P. STÊPIEÑ, J. DEJA, £. GO£EK, Poland
INFLUENCE OF CALCINED MAIN TAILINGS ON THE PROPERTIES OF ALKALI ACTIVATED SLAG MORTARS

£. KOTWICA, E. KAPELUSZNA, P. STÊPIEÑ, J. DEJA, M. ILLIKAINEN, £. GO£EK, Poland, Finland
INFLUENCE OF SULPHIDES ON HYDRATION OF GROUND GRANULATED SLAG ALKALI ACTIVATED MORTARS AND PASTES

P. KRIVENKO, O. KOVALCHUK, A. PASKO, Ukraine
UTILIZATION OF INDUSTRIAL WASTE WATER TREATMENT RESIDUES IN ALKALI ACTIVATED CEMENT AND CONCRETES

P. KRIVENKO, O. PETROPAVLOVSKI, G. VOZNUK, Ukraine
ALKALINE ALUMINOSILICATE BINDER-BASED COMPOSITE MATERIALS WITH WOOD AGGREGATES

B. KUCHARCZYKOVA, V. BILEK JR., H. SIMONOVA, D. KOCAB, Z. KERSNER, Czech Republic
SHRINKAGE AND FRACTURE PARAMETERS OF FINE-GRAINED COMPOSITES BASED ON ALKALI-ACTIVATED SLAG

W. KURDOWSKI, P. PICHNIARCZYK, P. ZAJD, A. BOCHENEK, Poland
THE UNCOMMON INFLUENCE OF ZINC ON THE SETTING TIME OF PORTLAND CEMENT

E. KUZIELOVA, M. ZEMLICKA, J. MASILKO, M. T. PALOU, Slovak Republic, Czech Republic
EFFECT OF COMPOSITION ON MICROSTRUCTURE AND PHASE DEVELOPMENT OF HYDROTHERMALLY CURED G-OIL WELL CEMENT

I. LANCELLOTTI, J. KIVENTERÄ, M. CATAURO, F. DAL POGGETTO, M. ILLIKAINEN, C. LEONELLI, Italy, Finland
INERTIZATION OF MINE TAILING VIA COLD CONSOLIDATION IN GEOPOLYMER MATRIX

A. LAZARO, H. J. H. BROUWERS, The Netherlands
REVIEW ABOUT THE CHEMICAL AND PHYSICAL PROPERTIES OF WATERGLASS

X. LI, Z. SHUI, R. YU, X. WANG, China
THE EFFECTS OF CORROSIVE MEDIUMS IN SEAWATER ON THE COMPOSITION OF HYDRATION PRODUCTS OF ULTRA-HIGH PERFORMANCE CONCRETE UNDER DIFFERENT AMBIENT TEMPERATURES

P. P. LI, Q. L. YU, C. P. CHUNG, H. J. H. BROUWERS, The Netherlands, China
MIX DESIGN AND PERFORMANCE EVALUATION OF ULTRA-HIGH PERFORMANCE CONCRETE (UHPC) WITH BASALT AGGREGATES

D. LITVAN, P. MATECKOVA, Czech Republic
EXPERIMENTAL TESTING OF CONCRETE FOUNDATION SLAB FOCUSED ON STRAIN GAUGE MEASUREMENT

G. LIU, M. V. A FLOREA, H. J. H BROUWERS, The Netherlands
CHARACTERIZATION AND TREATMENT OF CONTAMINATED GLASS FRACTIONS AS BUILDING MATERIALS

E. LOGINOVA, M. V. A. FLOREA, H. J. H. BROUWERS, The Netherlands
ESTIMATION OF THE ENVIRONMENTAL IMPACT OF MSWI BOTTOM ASH FOR REUSE AS BUILDING MATERIAL BASED ON ITS COMPOSITION

I. MERTA, A. MLADENOVIC, J. TURK, A. SAJNA, A. MAUKO PRANJIÆ, Austria, Slovenia
LIFE CYCLE ASSESSMENT OF NATURAL FIBRE REINFORCED CEMENTITIOUS COMPOSITES

V. MEYER, M. GIMENEZ, France
SOLIDIA AN EXAMPLE OF CCU

O. MIKHAILOVA, H. SIMONOVA, L. TOPOLAR, P. ROVNANIK, Czech Republic
INFLUENCE OF POLYMER ADDITIVES ON MECHANICAL FRACTURE BEHAVIOUR AND SHRINKAGE OF ALKALI ACTIVATED SLAG MORTARS

B. N. MOHAPATRA, ER. SHRIKANT T. VARPE, India
ROLE OF CEMENT CHEMISTRY AND MINERALOGY ON RHEOLOGY OF CONCRETE

M. NEDELJKOVIÆ, Y. ZUO, G. YE, The Netherlands
NEW TEST METHODS FOR CARBONATION IN ALKALI-ACTIVATED FLY ASH AND SLAG BINDERS: MICROSCOPIC COMPLEMENTARY TECHNIQUES

P. NEGRO, A. TRUPPI, F. PETRONELLA, E. SARDELLA, C. GIANNINI, A. AGOSTIANO, M. LUCIA CURRI, R. COMPARELLI, Italy
MODIFIED TiO₂ PHOTOCATALYSTS: MORTARS AND PLASTER FOR INDOOR APPLICATIONS

V. NIKOLIÆ, M. KOMLJENOVIÆ, N. DŽUNUZOVIÆ, T. IVANOVIC, Serbia
THE INFLUENCE OF MECHANICAL ACTIVATION OF FLY ASH ON THE TOXIC METALS IMMOBILIZATION BY FLY ASH GEOPOLYMERS

V. OMELCHUK, G. YE, R. RUNOVA, I. RUDENKO, Ukraine, China
SHRINKAGE BEHAVIOR OF ALKALI-ACTIVATED SLAG CEMENT PASTES

M. T. PALOU, V. ZIVICA, E. KUZIELOVA, M. ZEMLICKA, G. ORESKOVA, Slovak Republic
FORMATION AND STABILITY OF PHOSPHATE CERAMIC BINDERS UNDER HYDROTHERMAL CURING CONDITIONS

I. PAPAYIANNI, F. KESIKIDOU, S. KONOPISI, Greece
ALKALI-ACTIVATION OF HCFA MIXTURES WITH POZZOLAN AND KAOLIN. MECHANICAL CHARACTERISTICS

I. PAPAYIANNI, S. KONOPISI, F. KESIKIDOU, Greece
PHYSICO-MECHANICAL PROPERTIES AND DURABILITY ASPECTS OF ALKALI-ACTIVATED CALCAREOUS FLY ASH/SLAG MORTARS

F. PUERTAS, M. DEL MAR ALONSO, S. GISMERA, M. LANZÓN, T. BLANCO-VARELA, Spain
WORKABILITY AND RHEOLOGICAL BEHAVIOUR OF ALKALI-ACTIVATED MORTARS

Z. Y. QU, Q. L. YU, H. J. H. BROUWERS, The Netherlands, China
ASSESSING THE CHLORIDE TRANSPORT AND BINDING PROPERTIES OF CEMENT MORTAR CONTAINING Ca-Al-NO₃ LDHS

L. C. QUAAS, M. V. A. FLOREA, H. J. H. BROUWERS, The Netherlands
IMMOBILISATION OF THE MAIN CONTAMINANTS OF MSWI RESIDUES: CHLORIDES AND THEIR COUNTER IONS

N. R. RAKHIMOVA, R. Z. RAKHIMOV, A. F. KHUZIN, N. I. NAUMKINA, A. M. GUBAIDULLINA, Y. N. OSIN, Russia
CEMENTATION OF SIMULATED BORATE LIQUID WASTES WITH ALKALI-ACTIVATED SLAG CEMENTS

R. Z. RAKHIMOV, Z. A. KAMALOVA, E. U. ERMILOVA, Russia
HYBRID ADDITIVES IN BLENDED PORTLAND CEMENT

R. Z. RAKHIMOV, Z. A. KAMALOVA, E. U. ERMILOVA, Russia
THE BLENDED PORTLAND CEMENT WITH COMPLEX ADDITIVE BASED ON CALCINED MIX OF CLAY AND LIMESTONE

R. Z. RAKHIMOV, N. R. RAKHIMOVA, A. R. GAIFULLIN, Russia
THE PROPERTIES OF PORTLAND CEMENT PASTE INCORPORATED WITH FINE-DISPERSED POLYMINERAL CALCINED CLAYS

P. ROVNANIKOVA, H. SIMONOVA, P. SCHMID, Z. KERSNER, Czech Republic
EFFECT OF CURING TEMPERATURE ON MECHANICAL FRACTURE PARAMETERS OF ALKALI-ACTIVATED BRICK POWDER BASED COMPOSITE

I. I. RUDENKO I., O. P. KONSTANTYNOVSKYI, A. V. KOVALCHUK, Ukraine
EFFICIENCY OF REDISPERSIBLE POLYMER POWDERS IN MORTARS FOR ANCHORING APPLICATION BASED ON ALKALI ACTIVATED PORTLAND CEMENTS

M. SANYTSKY, T. KROPYVNYTSKA, T. KRUTS, O. HORPYNKO, I. GEVIUK, Ukraine
DESIGN OF GREEN MULTI-COMPONENT CEMENTS FOR IMPROVED SUSTAINABILITY

M. SANYTSKY, U. MARUSHCHAK, B. RUSYN, Ukraine
DEVELOPMENT OF NANO-MODIFIED HIGH PERFORMANCE CONCRETE

M. SEDLMAJER, J. ZACH, Czech Republic
EFFECT OF PLASTICIZING ADMIXTURES ON THE DEVELOPMENT OF THE HYDRATION TEMPERATURE AND THE PROPERTIES OF CEMENT PASTES

S. SEGERS, C. STRAUB, M. V. A. FLOREA, H. J. H. BROUWERS, The Netherlands
THE INFLUENCE OF GRANITE ON THE PERFORMANCE OF AUTOCLAVED AERATED CONCRETE

S. SEITL, H. SIMONOVA, Z. KERSNER, J. KATZER, J. DOMSKI, Czech Republic, Poland
CHANGE OF FRACTURE MECHANICAL PROPERTIES OF CONCRETE DUE TO THE REPLACEMENT OF AGGREGATES BY CERAMIC WASTE

Z. H. SHUI, X. P. WANG, X. S. LI, Q. L. SONG, R. YU, China
DURABILITY PERFORMANCE OF MARINE ENGINEERING USED ULTRA-HIGH PERFORMANCE FIBRE REINFORCED CONCRETE (UHPFRC): FOCUS ON AN APPROPRIATE APPLICATION OF METAKAOLIN

K. SCHOLLBACH, Z. QU, H. J. H. BROUWERS, The Netherlands
INVESTIGATING BUILDING MATERIALS FOR ARTIFICIAL REEFS

P. SILER, I. KOLAROVA, J. MASILKO, R. NOVOTNY, T. OPRAVIL, Czech Republic
THE EFFECT OF ZINC ON THE PROPERTIES OF PORTLAND CEMENT BLENDED WITH SECONDARY RAW MATERIALS

H. SIMONOVA, L. TOPOLAR, P. ROVNANIK, P. SCHMID, Z. KERSNER, Czech Republic
CRACK INITIATION OF ALKALI-ACTIVATED SLAG BASED COMPOSITES

M. SOMODIKOVA, D. VORECHOVSKA, B. TEPLY, Czech Republic
INPUT VALUE CORRELATION IN CHLORIDE ION INGRESS MODELLING AND CONCRETE STRUCTURES RELIABILITY

E. STEPANKOVA, L. KALINA, V. BILEK JR., E. BARTONICKOVA, Czech Republic
UTILIZATION OF BY-PASS CEMENT KILN DUST IN ALKALI ACTIVATED MATERIALS

C. STRAUB, S. SEGERS, M. V. A. FLOREA, H. J. H. BROUWERS, S. R. VAN DER LAAN, C. J. G. VAN HOEK, The Netherlands
THE MICROSTRUCTURE OF AUTOCLAVED AERATED CONCRETE – APPLICATION OF THE PARC-APPROACH

V. V. STROKOVA, NELUBOVA, M. N. SIVALNEVA, V. A. KOBZEV, Russia
NANOSTRUCTURED BINDER BASED ON ALUMINOSILICATE RAW MATERIALS

P. STURM, G. J. G. GLUTH, S. GREISER, C. JÄGER, H. J. H. BROUWERS, H.-C. KÜHNE, Germany, The Netherlands
INVESTIGATIONS ON ONE-PART GEOPOLYMERS SYNTHESIZED FROM DIFFERENT SILICA SOURCES

P. STURM, J. LÜCHTENBORG, P. HLAVACEK, G. J. G. GLUTH, H.-C. KÜHNE, J. GÜNSTER, Germany
ADDITIVE MANUFACTURING OF GEOPOLYMERS BY SELECTIVE LASER CURING

M. Z. TANTAWI, Z. Y. QU, Q. L. YU, H. J. H. BROUWERS, The Netherlands, China
HYDROPHOBIC ULTRA-LIGHTWEIGHT CONCRETE USING TREATED GROUND GRANULATED BLAST FURNACE SLAG AS WATER-RESISTING ADDITIVE

V. TURCHIN, L. YUDINA, S. SYCHUGOV, A. GUMENIUK, Russia
DRY MIX MORTARS BASE ON ALKALINE SLAG BINDER FOR USING IN AGGRESSIVE SULFATE MEDIUM

X. WANG, Z. SHUI, R. YU, Z. ZHANG, Q. SONG, China
STATISTICAL MIXTURE DESIGN APPROACH IN VERIFICATION THE BENEFITS IN USING THE MODIFIED ANDREASEN & ANDERSEN PARTICLE PACKING MODE FOR DEVELOPING ULTRA HIGH PERFORMANCE CONCRETE (UHPC)

W. WESTERHOUT, M. V. A. FLOREA, H. J. H BROUWERS, The Netherlands
NOVEL AGGREGATE RECIPES CONTAINING MSWI BOTTOM ASHES

P. M. F. VAN DE WOUW, M. V. A. FLOREA, H. J. H. BROUWERS, The Netherlands
LIBERATION OF ORIGINAL NATURAL AGGREGATES FROM RECYCLED CONCRETE BY ATTRITION CRUSHING

Q. L. YU, J. T. VAN DEN HEUVEL, X. GAO, H. J. H. BROUWERS, The Netherlands, China
THE EFFECT OF ALKALI AND Si CONTENT ON THE PERFORMANCE OF ULTRA-LIGHTWEIGHT ALKALI ACTIVATED CONCRETE

R. YU, Q. L. SONG, X. P. WANG, Z. H. ZHANG, Z. H. SHUI, China
OPTIMIZED DESIGN OF ULTRA-HIGH PERFORMANCE FIBRE REINFORCED CONCRETE (UHPHFRC): TOWARDS TO A SMART CONTROL OF THE FIBRES

B. YUAN, Q. L. YU, H. J. H BROUWERS, The Netherlands, China
CONTROLLING THE REACTION KINETICS OF SODIUM CARBONATE ACTIVATION WITH DIFFERENT SLAG CHARACTERISTICS

M. ZEMLICKA, E. KUZIELOVA, G. ORESKOVA, M. T. PALOU, Slovak Republic, Czech Republic
THE INFLUENCE OF FOUR-COMPONENT BINDER SYSTEMS ON THE DEVELOPMENT OF HYDRATION PHASES

S. ZHANG, M. NEDELJKOVIÆ, G. YE, The Netherlands
DEVELOPMENT OF FIBER REINFORCED GEOPOLYMER COMPOSITE: INFLUENCE OF PRECURSOR RATIO AND ALKALI ACTIVATOR

Y. ZUO, M. NEDELJKOVIC, G. YE, The Netherlands
PORE SOLUTION COMPOSITION AND SOLUBILITY OF ALKALI-ACTIVATED FLY ASH

The 6th International Conference Non-Traditional Cement and Concrete will be held from 19th to 22nd June 2017 in Brno. Brno is the second largest city in the Czech Republic and the metropolis of South Moravia. About 400.000 people live there. There are a lot of cultural and other sights (see for example http://www.brno.cz/).

Brno is located 200 km from Prague and 150 km from Vienna (Austria). There are international airports in the cities. A lot of express trains and buses connect these cities with Brno.

Brno has a small international airport but the connection services are fairly limited (http://www.brno-airport.cz/en/).

The conference will be held at the Hotel Continental Brno, Kounicova 6, 602 00 Brno, Czech Republic, http://www.continentalbrno.cz/en/introduction.html. We are negotiating special conference rates in this hotel.

The registration fee will be 450 EURO (230 EURO for PhD students). The fee includes proceedings (2 pages abstract), lunches, coffee/tea at breaks, cultural events and banquets.

Selected 4 pages papers will be published after review via Trans Tech Publications covered by SCOPUS database (additional 120 EURO).

A sightseeing trip can be organised after the conference for participants and accompanying persons who will be interested about it. The price of the trip will be about 150 EURO. The trip can finish in Prague – easy flight connection.